Thursday, August 23, 2007

Foam

I foam inner would be a good solution to cater for various pumps. The pump section could be swapped out if a new pump was bought.

Wednesday, August 22, 2007

Dropper Set

On some tubeing (particularly the infinity) the dropper set i exposed. The set needs protection from damage causing splits, or kinks in the tubeing.

Feed Holder

There are a lot of different types of feed on the market. An adjustable holder would cater for a variety of these.

Thursday, August 16, 2007

Handles

A handle could easily be moulded into the frame. It would be handy for transporting the frame while it wasnt in the pack.

Frame

The steel frames used in other packs seem less than ideal. They have issues with rust, and damaging the pack.
The kangaroo injection moulded frame is a much better solution. But injection moulding is quite expensive.
A rotationally moulded frame would be a good solution, cost, and materials wise. I'm going to look into rotational moulding design and manufacture.

Tubeing

Storage for tubeing while not in use.

Wednesday, August 15, 2007

Rubber Tube Guides

Rubber sheaths would make good tube guides. They could be easily produced, and would be flexible enough to fit the shape of the pack or frame. They would also be easy to secure using fasteners, or even sewing.